Specifications

Size:
4500mm wide by 4000mm high. For larger sizes please consult Monarch / Renlita.

Doors can be partially or fully glazed for viewing or showroom display and are glazed in accordance with AS1288. Standard glazing uses 6.38mm laminated safety glass. The use of other glass or glazing material should be referred to the manufacturer due to additional weight, deflection, door design and construction

Finishes:
Doors can be supplied in standard anodised or powder coat finishes.

Locking:
By use of internal padbolts. Unless otherwise specified, motorised doors will not be fitted with manual locks.

Counterweight Covers:
Counterweights shall be protected and covered with a removable pressed sheet to meet design requirements.

Motorisation:
Doors shall be driven by Monarch / Renlita’s exclusive patented dual 24 volt DC motor drives operating the linkage and counterweight. Motors are controlled by custom logic control, designed specifically for this operation. Various options for door operation are available including key switch, radio transmitter and card key. Doors have automatic load sensing if an obstruction is detected.

For basic dimensions and clearances please refer to the Monarch / Renlita 1000, 2000 and 3000 specifications.

Monarch / Renlita has a continuous program of product development and reserves the right to change specifications at any time and without notice.